[Tony Jaskeran]

Personally I don’t have the time for posting on some of the social media sites. I have limited myself to a few that I use regularly.

The Facebook page is a good idea, however it really requires someone to take ownership and post regularly otherwise it will not get used very much if the content is always out of date.

[Tony Jaskeran]

I also used to do a battery reset on my 3200 for all sorts of electronic issues, most of the time it solved these. I would also test your battery, our cars don’t behave well if the battery is on its way out.

If the issue still persists a diagnostic reader would be needed, however you can go to an indie and have it read first for about £80.00 if there is one near you.

 

[Tony Jaskeran]

Glad to hear you located the issue and fixed it Frank also thanks for posting your observations. This should help other owners to fix or eliminate their own problems.

[Tony Jaskeran]

Not aware of anyone doing this Lee other than having some instruction on the official track days. Might be worth asking around on Sunday at Brands Hatch.

[Tony Jaskeran]

Thanks, I’ve used Greg before and he has always been helpful.

Also David Askew can source and refurbish parts, he has refurbished a lot for me. http://www.davidaskew.co.uk.

Regards

Tony

[Tony Jaskeran]

You could try having a look at the diagrams on eurospares https://www.eurospares.co.uk/parts/maserati/4200-coupe/all/front-passengers-compartment-control-station-20204/170762

 

[Tony Jaskeran]

There is a plastic clip that holds the cushion down, as you can see it will probably break when you pull up. I managed to get a similar one from eBay. The backrest should just pull away, I had to give a bit of a heave as it sits quite low so you sort of have to pull up and back in a jerk movement.

[Tony Jaskeran]

Hello, here are the photos from when I dis-connected the tracker, according to the diagrams it looks the same for the 3200, 4200 & GS.

Best wishes

Tony

[Tony Jaskeran]

I used a Dremel to drill out from the front, being careful to mask up around. The grill needs to come out so you can remove the bolt from the underneath <u>, </u>a bit fiddly if you have large hands but long arms will help. If you get stuck let me know & I’ll try to find a link for a how to.

[Tony Jaskeran]

I purchased my Gransport bonnet badge from eurospares, give them a call, the part number I ordered was 670101565 with postage and vat £18.40. Quality was the same as the one I replaced, took me about 30 mins to fit.

[Tony Jaskeran]

I’ve never used the cafe as it’s always so busy, never understood why they don’t open earlier, the could serve a lot of teas and coffees to us early birds. Anyway I now take a flask with me.

Some great photos.

[Tony Jaskeran]

Good to see you Graham, a lovely sunny day a great selection of cars.

[Tony Jaskeran]

I’ll be driving down, getting there about 09.30 until 11.00. Will look out for you.

[Tony Jaskeran]

Hi Kevin, hats off to you as it must be a huge project. I don’t know anyone with this model. The only thought I have is to speak with McGrath as they look after a lot of the older cars so may know of an owner that can help you.

best wishes

Tony

[Tony Jaskeran]

I’ve just got the news letter, to be honest I can’t read the small font you mention with my glasses. I went for an eye test last Thursday so it would be good to hear views from other people.

The reason I went to the opticians was to get some contact lenses to use on my Goodwood track day next week, couldn’t read the small font with these on as well.

So your not the only one.

Regards

Tony

[Author]

Posts