The only Maserati Club in the UK officially recognised by Maserati S.p.A. Owners Clubs.

Tony Jaskeran

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 404 total)
  • Author
    Posts
  • in reply to: 4200 Coupe passenger door lock #23462
    Tony Jaskeran
    Participant

    Good luck Maurice & hope all goes well with the repair.

    in reply to: 4200 Coupe passenger door lock #23459
    Tony Jaskeran
    Participant

    ok Maurice,

    The Maserati part no.: 67294900 – LH door lock

    Older Maserati / Fiat-group reference: 82487457

    Those two numbers are essentially the same part – 82487457 is the earlier cross-ref that also appears as a Lancia Kappa Berlina left door lock.

    Pull the passenger door card, remove the lock and read the casting label – it should show 67294900 or 82487457 somewhere.
    Then you can buy either:

    A used or new Maserati lock with 67294900; or
    A Lancia/Fiat / aftermarket lock that explicitly lists OEM 82487457. These are often listed on eBay.

     

    in reply to: 4200 Coupe passenger door lock #23436
    Tony Jaskeran
    Participant

    Hi, which side do you need.

    These are Fiat/Alfa locks, so once we know which side I can suggest some part numbers.

    in reply to: Grandcabio boot switch not working #23430
    Tony Jaskeran
    Participant

    Hi Paul,

    Sorry I have been quite busy this last week.

    You now need to narrow it down to just the external boot switch circuit: the switch itself, its wiring to the ECU, or how it’s being actuated.

    Do the “paperclip test” at the boot switch plug. This is the quickest way to prove whether the switch is the culprit.

    Unplug the boot switch. With ignition on, briefly bridge signal to ground at the connector with a bit of wire/paperclip.

    If the boot pops open: The wiring from that connector back to the ECU is good.
    The ECU is seeing the input.
    The problem is almost certainly the switch assembly or how it’s being pressed.

    Lets us know how you get on.

     

     

    in reply to: New to the Club and owning a Maserati #23840
    Tony Jaskeran
    Participant

    Welcome Eric,

    The forum is relatively quiet, there are a u er of WhatsApp groups around the country for the local club hubs. If you’d like to join the general group and your local hubcap let me know. 07973619499

    Tony

    in reply to: Hi everyone newbie from Devon #23839
    Tony Jaskeran
    Participant

    <p style=”text-align: left;”>Ok Paul, if you can send me you number to me at 07973619499, I’ll get this sorted.</p>

    in reply to: Hi everyone newbie from Devon #23837
    Tony Jaskeran
    Participant

    Welcome Paul,

    I’m in London so far away, if you’re ever in the central let me know. My office is in Mayfair and the coffee and pastries are very good.

    Im not sure who your local Maserati hub captain is, if you want join general members WhatsApp group let me know & I can send a request to the admin.

    in reply to: Quattroporte VI #23833
    Tony Jaskeran
    Participant

    Hi Joe,

    Glad to hear that, sure I will send my contact details to you. I’m based in Mayfair so easy to meet up.

     
    <p style=”text-align: right;”></p>

    in reply to: Quattroporte VI #23831
    Tony Jaskeran
    Participant

    Hi Josef,

    Welcome & best wishes on your search.

    There are a number of Hubs around the country that have a WhatsApp group. There is more exchange of information and support as many members prefer this form of communication.

    You mention Autoshield & Mario is at the NEC this weekend at the Classic Motor Show. I’ll be on the stand tomorrow, otherwise if you are attending please come to the stand and speak to any of us.

    If you post up your email &  location, I’ll forward onto your local Hub Captain so you can join the local group.

    Im in SW London btw.

    in reply to: Wipers not clearing the screen #23848
    Tony Jaskeran
    Participant

    I guess there are no GT or stradale owners reading this.

    Check the rubber blades and see if they are even across the surface.

    Bosch “AeroTwin” or “Aeroblade” sometimes sit slightly differently to the OEM Valeo/Maserati ones, which can leave streaks if the curvature doesn’t match. Double-check the exact sizes recommended for your chassis.

    Otherwise I can’t think of anything other than back to OEM

    in reply to: Hand brake cable needed urgently! #23830
    Tony Jaskeran
    Participant
    in reply to: Fuel type #23764
    Tony Jaskeran
    Participant

    I used E10 a while ago and it caused all sorts of problems. So avoid it ever since in all my cars.
    There is no actual formal guidance when I looked at the time btw.

    in reply to: enhanced exhaust sound #23762
    Tony Jaskeran
    Participant

    Sorry to hear that.
    <p style=”text-align: left;”>First of all I’d get the battery checked, then make sure the battery cables are tight.

    Also, if possible get a diagnostic read and see if there are any error codes.</p>
    Let us know how you get on with battery testing.

    & apologies I’ve been out of the UK hence the late reply.

    in reply to: Auto Italia Carlton Towers 31st August #23015
    Tony Jaskeran
    Participant

    Thanks Mick,
    Due to travelling, I won’t make either but will attend the Concurs of Elegance next Saturday.

    in reply to: 3500GT and Sebring parts #23761
    Tony Jaskeran
    Participant

    Thanks Jerry, can you give him my email [email protected] and ask him to send me the list of parts he has for sale.

    My mobile number is +447973619499

     

Viewing 15 posts - 31 through 45 (of 404 total)