The only Maserati Club in the UK officially recognised by Maserati S.p.A. Owners Clubs.

Gran Cabio 2011 Wiper Blade replacements

Home Forums General Chat Gran Cabio 2011 Wiper Blade replacements

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #22074
    antony-condon
    Participant

    Morning folks,

    I have been on to various Specialist Websites for replacement Wiper Blades for my 2011 Gran Cabio and wondered if there are any alternatives. I have been on the Bosch website, typed in my Reg and nothing comes back. I went onto another website and had blades delivered which the site stated would fit the car but they came with very modern fittings. Thus, rendered them useless.

    Is it the case that I will have to order them from Scuderia at £125 or are there confirmed alternatives which would fit?

    #22075
    stewart-bailey
    Participant

    Hi Antony,

    I had the same problem.  Bosch ones don’t fit even though they say they do.  I used Scuderia in the end.  [email protected]

     

     

    #22076
    antony-condon
    Participant

    Thanks Stewart.

     

    I have found another site called Autodoc and they have a ‘hook fitting’. If this doesn’t work, I will have to order from Scuderia

    #22077
    David Brenchley
    Participant
    #22078
    Tony Jaskeran
    Participant

    Autodoc have a good selection I and a few others have used them.

     

    #23804
    Eric Toft
    Keymaster

    Hi Anthony,

    I had the same issue with my GT which has different size blades and the large one was £130 alone.

    These are old style wiper blades and not modern flex blades, so I found a site that does replacement blade inserts, so as long as the blade holder is sound you can remove the rubber blade and metal inserts, cut new blade to size replace inserts and thread back in.

    Mine came with 4 rubber blades for about £25, so enough for two sets.

    If you have trouble finding a site let me know and I will look up where I got mine from.

    regards Eric

     

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.