Below are the steps to reset the tilt function and memory functions of the 3200 seats:
Reset seat tilt memory
Open the driver’s side door and QUICKLY (must all be completed within 5 seconds) click the fore/aft adjuster forward-backward-forward-backward (just click – you don’t need to move the seat much), then release the seat back and tilt it all the way forward. The seat will then go through a calibration cycle sliding all the way forward and back twice.
Seat memory set
Adjust the seat to the desired position.
Turn on ignition but do not start the engine.
Tilt the seat forward.
With the seat still tilted forward, adjust the seat base as far forward as it will go.
Tilt the seat back.
The seat will then return to the desired position.
This reteaches the maximum movement of the seat to the memory.
This generally occurs when one of two things has happened. 1) the seat has been left in the tilt forward position for too long, or 2) the seat was in the tilt forward position when the ignition position was changed, either turned on or off.
.
